The welding electrodes 3.2mm coating is composed of low hydrogen iron powder. This electrode is used in welding soft steel parts with high tensile strength 490MPa. Used in shipbuilding and offshore, bridges, tanks, buildings and industrial machinery. You can go directly to the distributor to buy these products.
Essential Points to Know about Welding Electrode
We are going to talk about welding electrode products, in fact, we will explain and tips about it.
Earlier we talked about welding electrodes and our effort was to be able to provide you with as much information in this field as possible and to acquaint you with the types of electrodes. According to the previous articles that we talked about welding electrode (welding wire), now in this article you will get good information about the components and materials of an electrode as well as the different stages of its production. This is a question that may be on your mind, which we will now address.
Ingredients of electrodes
The behavior and properties of an electrode are not limited to the chemical composition of its constituent elements, but also the source of the preparation of these materials and the classification and operations performed on them.
In general, the components of electrodes are divided into 6 main categories:
- Slag-forming materials in the form of minerals. Such as titanium ore, manganese ore, fluorospar, iron oxide and some silicates.
- Shielding ingredients, such as starch, sawdust, charcoal, flour or wood paste.
- Reducing or deoxygenating agents used to reduce some oxides. Such as ferromanganese, ferrochrome, ferro-titanium and flake aluminum.
- Alloying agents are added to the coating to achieve the expected final composition of the weld. Binding agents that cause the coating to paste and stick to the brain, such as sodium silicate.
- In some electrodes, some base metal powder is added. Because it increases sedimentation rate, efficiency and effectiveness. In steel electrodes, for example, amounts of iron are added to the coating.
- Finally, after selecting and mixing the coating ingredients in the mixer, a paste-like substance called “electrode mud” is formed. This material is pressed by special presses on the electrode brain rod. After the electrode is completely dry in the drying oven, it is ready to use or pack.
6 Steps to Using Welding Electrodes for Construction
As you should know, the welding electrode use is completely different Because the welding operation for the structure is different, just as you consider the details of the building skeleton, it must also be considered that a skilled welder for the welding operation must use different types of electrodes for different points. We will tell you 3 of these to get acquainted with these issues properly.
The various methods of welding the building skeleton using an electric arc are as follows:
- Arc welding: The most common method of welding a steel frame building is electric arc welding, which is divided into different types such as manual welding with coated electrode (SMAW), submerged arc welding (SAW), electric arc welding with shielding gas (GMAW), and hollow electrode ( FCAW), electric gas (EGW), electric slag (ESW) and stud welding.
- Manual welding with coated electrode (SMAW): One of the most common methods of electric arc welding is manual welding with coated electrodes that can be used in different positions of flat, horizontal, overhead and ceiling in the building. In this welding method, a hand-melted electrode is used as a filler, which can have different types according to the needs of these electrodes. The operation of this method is that by connecting one pole of the production source, a potential difference is created between the part and the electrode, and an electric arc is created between the other pole and the other pole. This electric arc melts the electrode and the part.
- Submerged arc welding (SAW): In this method of welding the structure of the building, which is often done automatically, the welding protection material is poured on the joint in the form of powder. In submerged arc welding, an electric arc is placed under the powder used, which prevents it from splashing and igniting. The continuous flow of powder in this process protects the formed molten pool against air gases. In addition, the powder used improves the chemical composition of the weld and helps clean the weld metal. This type of building skeleton welding is suitable for long welds and thick sheets.
Welding Electrodes 302mm Shopping Center
To shop for the best welding electrode You should go directly to the 302 mm welding electrodes shopping center, because this way you can mainly buy all kinds of electrodes from us. The conditions for buying this product are such that wherever you live in the world, you can make the best purchase for yourself by visiting this site.
Your comment submitted.