Croken and pro WIFCO are two steel companies working directly on steel products. Here we will give you brief information about these companies. These companies are working for a very long time in US, selling and manufacturing steel products.
WIFCO Steel Products Inc. manufactures cost-effectively for quality, safety, and durability. With bolted connections, our products save shipping, production, and long-term costs and time. Our strong yet flexible construction provides a stable platform that allows you to easily make changes while ensuring your health.
Croken steel is a producer of steel products with high quality and long durability. With its best and high-quality materials used in the products, croken steel is the best option for buyers to connect to.
The products these two companies manufacture, and produce are the products you see in the market but the only thing different is the quality they have. Here I will give you some information about the products, how they are made and where are they coming from.
corken steel products
Corken Steel Products Company was founded in 1955 and is a wholesaler of metal roofing, rainwear, and construction products. In the following years, the company expanded to heating and air conditioning systems and all related products. This company is located in the United States and the company currently consists of three different divisions – heating and air conditioning, roofing, and sheet metal manufacturing – with fifteen facilities, including a distribution center that opened in November 2005 and a facility in South Louisville in 2019. This company is getting help from a lot of good and advanced technology to have a good quality product.
The steel industry is one of the largest and most comprehensive industries in my country and other developed countries. In recent years, the country’s production capacity has increased significantly with the opening of steel production complexes. Steel is one of the tools for national production and development and is widely used in almost all manufacturing and construction projects.
The steel industry generally has different processes, some of which require cooling. Cooling towers in connection with the execution of processes in steel production lines that require water for cooling are:
1- Cooling towers, hot rolling lines, plates, steel bars, beams
2-heat treatment line cooling tower
3- Cooling of steel industrial furnaces
4- Cooling towers, units for making bars, wires and profiles
At the same time, most of the cooling process in the steel industry takes place through cooling towers or cooling towers using water. At the same time, the steel industry has unique properties that make the design and delivery of cooling towers and cooling towers in the steel industry particularly important. The most important of these features are as follows:
1- Presence of iron dust and airborne particles.
2- Relatively high-water hardness.
3-sprinkler water for cooling towers in the steel industry.
4- Limitation of electricity and energy consumption.
It is important to note that our beloved country, Iran, has limited water resources and reserves, and saving water, especially industrial cooling towers, can help prevent drought and reduce the cost of supply. Of these, liquid and CFD simulations of airflow in cooling towers can be very efficient using intelligent systems, using high quality drips and fillings that are more efficient.
It is important to note that the following information is required for cooling towers in the steel industry. In this way, steps can be taken to reduce and control the water and electricity consumption in cooling towers in the steel industry, which in addition to reducing costs can also help the climate environmentally. With these explanations, it should be noted that implementing such a process requires attention from the organization’s top management and costs time, research, and execution. Our goal is to increase the power plant’s capacity to the highest level during the summer by using the latest technology.
The main method of industrial mold cooling
- A) Cooler:
Cool the mold with a cooler
Given the cold water temperature and the required accuracy and economic problems, a suitable cooling machine can be selected. The use of the injection molding machine cooler is to reduce the temperature of the parts during the molding process and prevent the production of defective parts. will provide high efficiency. In this way, cooling the mold with a chiller is a good option.
If the process of cooling and lowering the temperature during injection molding and mold cooling is not performed well, any stains, dents or dents in the mold may cause distortion and ultimately result in a poor product. Stable temperature conditions meet all the requirements for an injection molding system. The injection-molded cooler guarantees the quality of the end product and has the following benefits.
Less waste – High system efficiency – Set the correct process temperature – Better heat transfer – Less system downtime Less component failure – Lower water temperature.
When using a combination of water and glycol, a dedicated chiller should be used, called a sub-zero chiller, which is essentially a piston-cylinder compressor installed in the chiller.
- B) Open and closed cooling towers:
It is used to dissipate water heat by exchanging heat with air, reducing water heat by evaporating water and reusing it for recycling.
In the plastics industry, this cooling method is mostly used to cool the equipment’s hydraulic oil. The water-cooling temperature in Tehran is between 20 and 27 degrees Celsius in summer, and the water can be cooled to 15 degrees in winter.
This cooling method can be used to cool polymer molds such as polyethylene and polypropylene and materials with a crystalline structure, but if precise cooling temperatures below 20 degrees Celsius are required, a compression cooler is required.
The main use of cooling towers in the industry is to regulate the temperature of heat sources and heavy machinery such as boilers, injection molding machines, and induction furnaces. Induction furnaces must transfer the extra heat generated to the external environment after the melting process. The air around the furnace is obviously not capable of dissipating much of this thermal energy to the external environment. A water stream with a very high specific heat capacity achieves this and returns to the cooling tower for recovery after receiving heat. In a plastic injection system, the mold must be cooled for a certain period of time during the injection of the plastic material. The cooling of the mold is done by an industrial cooling tower or a water-cooled cooler.
- C) Capacitor or capacitor:
It is responsible for cooling the working fluid, mainly the conversion of steam into liquid, which is usually done by cooling it. In this work, the latent heat is absorbed from the working fluid and transferred to the condenser coolant.
This company along with other companies works to produce and have good capacities that are demanded by the country. The text above was just a part of the process and its importance.
Fabriweld tubular steel products
Fabriweld Steel Pipe Products Ltd was established in 1979. The company’s business lines include the production of tubular, structural metals, and steel or other metal products for structural purposes.
Running an independent business is not the way to go. Knowing this fact, modern entrepreneurs turn to professional institutions that help to significantly reduce all possible risks by carrying out their work. One of these locations in Nottingham is Fabriweld Tubular Steel Products Ltd. When choosing a business partner, you should consider the following:
- Customer-centric and ready to answer all your questions
- Expert work experience
- Reply
- Internal organization of workflow
- Existence of Warranties and Liability for Results
- It is important to remember that only qualified contractors can improve the efficiency of your business.
Tubular steel products are mentioned in the previous part, but some are here to know:
steel pipes
These pipes are used for water pipes. Large diameter pipes are made of metal and can be extended over long distances.
cast iron pipes
Cast iron pipes are mostly made of gray cast iron, and coatings and coatings are used to improve corrosion resistance. This type of pipe has been used much in the past. However, the flexible cast iron pipes used today are superior to cast iron pipes. This type of pipe is suitable for transporting water, gas and wastewater.
oil pipeline
Oil pipelines are made of steel with external coatings and cathodic protection to reduce external corrosion. The oil pipeline is connected by welding. There are two types of oil pipelines:
Crude pipelines – transport of crude oil to refineries.
Product pipelines – transport of refined products such as petrol to the market.
Natural gas pipeline
Pipelines are the only practical way to transport natural gas from land, as other means such as trucks and trains are very expensive. Gas collection and transmission lines are made of steel, while most distribution lines use flexible plastic pipes that are easy to install and will not corrode.
Your comment submitted.